Publicidad
ENGLISH
Charging Station & Battery Packs
For use with Meta Quest 2
Model number: VS4203
,
User Guide
Contents:
1 x Charging Station
2 x Rechargeable Battery Packs (1200mAh NimH)
1 x USB to USB Type C Charging Cable
2 x Battery Covers
1 x USB Type C Magnetic Charging Connector
The Rechargeable Battery Packs are fully compatible with
the Official Standard Controllers for Meta Quest 2.
Installation & Use
1. Using the charging cable supplied, connect the charging
station to a suitable USB power supply.
2. Insert the USB Type C Magnetic Charging Connector
into the charging port on the side of your Meta Quest
Headset.
3. Place your Meta Quest Headset, facing forward, into
the Charging Station ensuring the magnetic charging
connector on the right-hand side makes a connection
with the magnetic connector on the headset.
4. Remove the battery
pack cover on
your Meta Quest
controller along with
any batteries. – Keep
these safe with any
other accessories for
use in future.
5. Carefully insert the
Venom Rechargeable
Battery Pack into
the Meta Quest
controllers.
6. Select the correct battery cover for your controller and
carefully click into place.
7. Place the controllers into the charging docks.
8. When charging the LED light will glow red, once fully
charged it will glow green. Each charging port has its
own dedicated charging light to indicate when each
device is charged.
9. Once fully charged you can remove your Meta Quest
Headset and the controllers from the Charging Station.
Publicidad
