schallwerk WORK+ Manual De Instrucciones página 6

English
1.
Korrektes Aufsetzen:
1. Put both ear protection capsules over your ears.
2. Adjust the correct position by raising and lowering the brackets.
3. If the hearing protection is too tight, opening the arms can help.
Care instructions:
Regularly clean the hearing protection pillow with mild soap and water.
Failure to follow these instructions may reduce the protection provided by the
earmuff and may result in hearing loss:
1. Research suggest that users may receive less noise reduction than indicated by the
attenuation value(s) on the packaging, due to variation in fit, fitting skill and motivation
of the user. Refer to your applicable regulations for guidance on how to adjust label
values and estimate attenuation. In addition, Protavis GmbH strongly recommends fit
testing of hearing protectors.
2. Ensure the hearing protector is properly selected, fit, adjusted, and maintained.
Improper fit of this device will reduce its effectiveness in attenuating noise. See the
enclosed instructions for proper fit.
3. Inspect the hearing protector before each use. If damaged, select an undamaged
hearing protector or avoid the noisy environment.
5
2. 3.
Please note:
Sealing is too tight:
Do not press the hearing protection
capsules too tightly onto your head.
Avoid leaks:
Avoid having hair under the earmuffs,
which can reduce full protection.
Cover the ear completely:
The ear protection capsule must not be at
an angle or only partially cover the ear.