General Safety Rules - Bosch 1209 Instrucciones De Funcionamiento Y Seguridad

Product Data - Die/Straight Grinders
Model number
Identification number
Collet capacity
Max. RPM of accessories 16,000
Max. capacity of accessories
Mounted point
Polishing wheel
Grinding wheel
Accessory Listing
Wrench (22mm)
Wrench (14mm)
Shaft lock pin
Rubber tool rest
5" Guard
Allen key (6mm)
Outer flange
Inner flange
5/8"-11 nut
(* = standard equipment)
Die Grinder Components
1. Collet nut
2. Spindle
3. Ventilation openings
4. Paddle switch
5. Switch button
WARNING!
"READ ALL INSTRUC-
TIONS". Failure to follow the SAFETY RULES
identified by the BULLET (•) symbols listed
BELOW and other safety precautions, may
result in serious personal injury. Keep these
operating instructions with this product.

GENERAL SAFETY RULES

for all Power Tools
Work Area
• KEEP WORK AREAS CLEAN. Cluttered
areas and benches invite accidents.
• AVOID DANGEROUS ENVIRONMENT.
Don't use power tools in damp or wet locations.
Do not expose power tools to rain. Keep work
area well lit.
BM 3609929341 12/03
1209 1210
0 601 209 1 . . 0 601 210 1 . . 0 601 214 1 . .
1/4" shank 1/8"-1/4"
27,000
2" Dia. 1" Dia.
NA NA
NA NA
* NA
* NA
NA *
* NA
NA NA
NA NA
NA NA
NA NA
NA NA
6. Collet
7. Wing nut
8. Wheel guard cover
9. Wheel guard
10. Mounting strap nuts
• AVOID GASEOUS AREAS. Do not oper-
ate portable electric tools in explosive atmo-
spheres in presence of flammable liquids or
gases. Motors in these tools normally spark,
and the sparks might ignite fumes.
• KEEP CHILDREN AWAY. Do not let
visitors contact tool or extension cord. All
visitors should be kept away from work areas.
• GUARD AGAINST ELECTRIC SHOCK.
Prevent body contact with grounded surfaces
such as pipes, radiators, ranges and refrigerator
enclosures. Rubber gloves and non-skid foot-
wear are recommended when working out-
doors, where damp or wet ground may be
encountered. A Ground Fault Circuit Inter-
rupter protected power line must be used for
these conditions.
3
3
1214 1215
0 601 215 1 . .
NA 1/8"-1/4"
6,800 27,000
NA 1" Dia.
5"OD x 1"thick 2" Dia.
5"OD x 1"thick NA
NA NA
NA NA
NA NA
NA NA
* NA
* NA
* NA
* NA
* NA
11. Inner flange
12. Outer flange
13. Nut 5/8"-11
Personal Safety
12/16/03, 11:40 AM