Vector VECLIPS4 Manual De Instrucciones página 3

LCD DISPLAY
BATTERY LIFE INDICATOR
FAULT INDICATOR
CONTROL PANEL BUTTONS
1. To activate the unit press the power
activate for 2 seconds and shut down.
2. To switch the unit off press the power
3. The AC icon will light up when the AC button is pressed, output power and remaining use time will be displayed.
4.
5. When multiple ports are being used at the same time, the total output power and remaining use time are displayed.
6. Should a fault occur the fault icon will flash with the corresponding output icon. Immediately shut down that output or it will be
automatically shut after 10 seconds. Other outputs will not be affected.
2
FAN ON
TIME
button for 2 seconds. The display panel will light up and the ventilation fan and
button for 2 seconds until the display panel shuts off.
Will light up to each corresponding feature when activated, output power and remaining use time will be displayed.
INPUT/OUTPUT POWER
USB-A OUTPUT
POWER BUTTON
CHARGING BUTTON
DC
USB POWER
POWER BUTTON
DC OUTPUT
WIRELESS LED
LIGHT BUTTON
AC
BUTTON POWER BUTTON
120V AC
OUTPUT
LED LIGHT
USB-C OUTPUT
WIRELESS
OUTPUT
icon will