Descargar Imprimir esta página

Vector VECLIPS4 Manual De Instrucciones página 7

Publicidad

Idiomas disponibles

Idiomas disponibles

SAFETY GUIDELINES
/ DEFINITIONS
DANGER:
Indicates an imminently hazardous situation which, if not
avoided, will result in death or serious injury.
WARNING:
Indicates a potentially hazardous situation which, if not
avoided, could result in death or serious injury.
CAUTION:
Indicates a potentially hazardous situation which, if not
avoided, may result in minor or moderate injury.
CAUTION:
Used without the safety alert symbol indicates potentially
hazardous situation which, if not avoided, may result in property damage.
RISK OF UNSAFE OPERATION.
basic safety precautions should always be followed to reduce the risk of
personal injury. Improper operation, maintenance or modification of tools
or equipment could result in serious injury and property damage. There
are certain applications for which tools and equipment are designed.
Manufacturer strongly recommends that this product NOT be modified
and/or used for any application other than for which it was designed. Read
and understand all warnings and operating instructions before using any
tool or equipment.
READ ALL
INSTRUCTIONS
WARNING:
Read all instructions before operating power station.
Failure to follow all instructions listed below may result in electric
shock, fire and/or serious injury.
IMPORTANT SAFETY
INSTRUCTIONS
GENERAL SAFETY WARNINGS AND
INSTRUCTIONS
• This unit was designed for household use only.
WARNING –
Risk of fire, electric shock, burst hazard, or injury to
persons or property:
• Avoid dangerous environments. Don't use the power station in damp or
wet locations. Don't use appliances in the rain.
• Keep children away. All visitors should be kept at a distance from work
area.
• Dress properly. Do not wear loose clothing or jewelry. They can be
caught in moving parts. Rubber gloves and substantial, non-skid footwear
are recommended when working outdoors. Wear protective hair covering
to contain long hair.
• Store idle appliance indoors. When not in use, the power station should
be stored indoors in a dry and high or locked-up place – out of reach of
children.
• Don't abuse cord. Never carry the power station by cord or yank it to
disconnect from receptacle. Keep cord from heat, oil, and sharp edges.
• Disconnect appliances. Disconnect the power station from the power
supply when not in use, before servicing, and when changing accessories.
• Ground Fault Circuit Interrupter (GFCI) protection should be provided
on the circuits or outlets to be used. Receptacles are available having built
in GFCI protection and may be used for this measure of safety.
• Use of accessories and attachments. The use of any accessory or
attachment not recommended for use with this power station could
be hazardous. Refer to the accessory section of this manual for further
details.
• Stay alert. Use common sense. Do not operate this equipment when you
are tired or impaired.
• Check for damaged parts. Any part that is damaged should be replaced
by the manufacturer before further use. Do not use tool if switch does not
turn it on and off. Contact the manufacturer at 1-877-571-2391 for more
information.
6
When using tools or equipment,
• Do not operate the power station near flammable liquids or in
gaseous or explosive atmospheres.
• Never submerge this unit in water; do not expose it to rain, snow or
use when wet.
• To reduce risk of electric shock, disconnect the unit from any power
source before attempting maintenance or cleaning. Turning off controls
without disconnecting will not reduce this risk.
• Do not use this unit to operate appliances that need more than 10
amps to operate from the 12 Volt DC accessory outlet.
• Do not insert foreign objects into the USB port, the 12 Volt DC
accessory outlet or the 120 volt AC outlet.
SPECIFIC SAFETY INSTRUCTIONS FOR
CHARGING THIS UNIT
• IMPORTANT: This unit is delivered in a partially charged state. Fully
charge unit with enclosed charging power adapter before using for the
first time.
• To recharge this unit, use only the supplied charging power adapter.
• All Power switches should be in the OFF position when the unit is
charging or not in use. Make sure all switches are in the OFF position
before connection to a power source or load.
BEFORE FIRST USE
• Charge the unit before first use and when battery power is less than 20%
to maintain optimal performance and extend service life.
• Each bar on the indicator display indicates remaining battery level.
• Never completely discharge the internal battery.
CHARGING WITH THE HOME CHARGER
• Connect the DC connector tip to the power station Charging Port,
charging will start automatically.
• The Indicator will show you the charging battery level and "Time to Full"
on the remaining charge time.
When fully charged, remove the cable from the unit.
OPTIONAL CHARGING VIA USB-C PD
• The USB-C PD port can be used as a power input or power output port.
• For power output to charge external devices, refer to section "USB-A &
USB-C CHARING PORTS" below.
• For power input to charge the Power Station via the USB-C PD port,
connect the included USB-C cable to a standard 60W or higher USB-C
wall adapter. Wall adapter not included.
• Once connected, charging will start automatically.
60W Wall Adapter
(Not Included)
P D
W
6 0
USB- C Cable
USB-C PD
(Included)
CHARGING
PORT

Publicidad

loading

Este manual también es adecuado para:

Veclips6