Munchkin Float MCKA0865 REV1 Manual Del Propietário página 8

How to Assemble
ATTACHING LEGS TO LEG BRIDGES
1. Place a leg bridge on the floor and
ensure bottom of leg bridge is flat
on the ground, then insert the front
(shorter) legs into the sockets. Side
with arrow pointing down goes into
the bridge sockets.
2. Insert the back legs into the sockets
of the other leg bridge. Again, make
sure the side with arrow pointing
down goes into the bridge sockets.
TIP: Step on the bridges to keep the
legs upright during assembly.
INSTALLING SEAT
3. Insert front legs (A, B) and back legs
(C, D) to matching left and right
seat bracket sockets. Make sure the
bridge is flat against the floor when
assembling the seat bracket.
If the seat bracket is folded, press
the button on the side to open until
you hear the click sound.
TIP: Seat brackets with the hooks
attach to the back legs.
8
B
D
D
Hook
Back
A
Front
C
A
B
Front
A
B C
Front