Dometic POWER & CONTROL DTB01 Instrucciones De Uso página 16

EN
7. Tick the desired battery type and select its capacity by pressing the
Advanced settings on the battery can be made in the charging profile screen (see
page 16).
After finishing the configuration the home screen will be displayed.
Setting the charging profile
1. Choose the battery type by pressing the number of the charging profile.
e
2. Press the arrow icon to access the profile detail screen for more information on the charging data.
3. For a custom profile further settings have to be made.
11 Cleaning
The device is maintenance-free.
Occasionally clean the product with a damp cloth.
12 Troubleshooting
Problem
The display system does not work. No
states are displayed.
16
Possible cause
The connection of the connected de-
vices is incorrect.
The battery voltage is to low.
The communication cable is not con-
nected correctly or defective.
+ –
button or button to set the battery.
Setting the charging profile
Suggested remedy
Connect the devices properly.
Recharge the battery.
Check the communication cable
for insulation faults, breaks or loose
connections.
on