TQ HPR Range Extender V01 160 Wh Manual Del Usuario página 8

CAUTION
Risk of accident due to release of the Range Extender from the locking
mechanism
► Only use the screws provided by the bicycle manufacturer or the
ISO 7380-1 M5 x 10 A2 button head screws included in the scope of
delivery to attach the FIDLOCK® Bike Base.
Screws with a higher head mean that the FIDLOCK® Force Connector on the
Range Extender is not firmly connected to the FIDLOCK® Bike Base and will
come loose while riding.
► Fasten the FIDLOCK® Bike Base
(Pos. 1 in Fig. 1) with the two
button head screws (Pos. 2 in
Fig. 1) in the threads provided for
this purpose (Pos. 3 in Fig. 1, follow
the specifications of the bicycle
manufacturer) inside the e-bike
frame.
► Tighten the two button head bolts
with a torque of 2 Nm or to the
max. torque values specified by
the bicycle manufacturer.
NOTE
► Observe the inscription
engraved "upside>>" when
mounting on the FIDLOCK®
Bike Base (Pos. 1 in Fig. 2). The
upper edge of the FIDLOCK®
logo (Pos. 2 in Fig. 2) on the
FIDLOCK® Force Connector
must point in the direction of
the arrow from "upside >>".
4
1
2
Fig. 1: Fasten the FIDLOCK® Bike Base
to the e-bike
2
Fig. 2: Orientation of FIDLOCK® Bike
Base and FIDLOCK® Force
Connector
3
1
EN - 7