Zeegma Chef Manual De Usuario página 8

you can lock the device by moving the height adjustment lever
to the LOCK position and unlock it by moving it to the OPEN
EN
position (fig. C).
8.
When heating is complete, the device will beep three times,
the grill plates will stop heating, the device will enter standby
mode and the switch (8, fig. B) will flash.
If the device detects an electrical short or faulty installation, the
light indicators will flash and the device will beep and switch off.
Time and temperature settings
1.
Bring the device out of standby mode by pressing the switch
(8, fig. B).
2.
Press the desired button, TEMP (1, fig. B) to change the
temperature or TIMER (2, fig. B) to change the heating time
of the meal. Then press the "+" or "-" button to increase or
decrease the selected setting.
The device will enter the selected time/temperature mode after
approximately 5 seconds.
There are 5 preloaded automatic programmes with predefined time
and temperature settings – steak, chicken, fish, toast, burger.
Open grill function
To use the device in the open grill function, place the device on a
flat surface and then press the open grill function button (4, fig. A)
while opening the device (fig. D).
Time and temperature for selected meal types
Meal type
Steak
(9, fig. B)
Temperature
(5, fig. B)
230°C
RARE MEDIUM
(6, fig. B)
02:30 03:30
WELL-
DONE
(7, fig. B)
05:00