EN
English
Explanation of symbols
• Signs and symbols may not be removed or covered.
Read and observe the user manual before starting to use the product.
Your product in overview
▶ see figure 1
Note:
Size, appearance and range of functions depend on the product variant.
1.
Cover
2.
Operating panel with display
3.
Container
4.
Battery compartment
5.
Cover holder (only Article No. 3421, 3422, 3423)
6.
On/off switch
Operation
Insert batteries
# 3420, # 3421
▶ see figure 2
# 3422, # 3423
▶ see figure 3
– Remove the cover (1).
– Open the battery compartment (4) on the bottom side of the cover and remove the battery
container (7) by pulling the strap (8).
– Insert the batteries into the battery container. Pay attention to the correct polarity!
– Put the battery container back into the battery compartment. Make sure that the strap is
back under the battery container.
Insert bin liner
▶ see figure 4
– Fold the bin liner over the edges of the container (3).
– Fix the excess bin liner material in the opening (9) provided in the container.
Waste bin - Switch on and off
# 3420, # 3421
▶ see figure 2
# 3422, # 3423
▶ see figure 3
– To switch on the product, set the on/off switch (6) on the bottom side of the cover to [ON].
– The waste bin is in standby mode and ready for operation.
– To switch off the product, set the on/off switch (6) to [OFF].
14
12