Descargar Imprimir esta página

Wiesenfield WIE-EFT-100 Manual De Instrucciones página 17

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 49
BATTERY REPLACEMENT:
1. If the icon [5] flashes on the display, replace the battery.
2. Open the battery compartment on the back of the device.
3. Remove the old battery and insert a new one.
4. Close the battery compartment.
3.4. Cleaning and maintenance
a)
Use only non-corrosive cleaning agents for cleaning the surfaces.
b)
Store the unit in a dry and cool place protected from moisture and direct
sunlight.
c)
Do not spray the unit with a stream of water or immerse it in water.
d)
Perform regular inspections of the unit checking technical fitness and any
damages.
e)
Do not leave the batteries in the unit when it will not be used for a long time.
f)
Use a soft, damp cloth for cleaning.
g)
Do not use sharp and/or metal objects (e.g. wire brush or metal spatulas) as
they may damage the surface of the material from which the unit is made.
h)
Do not clean the unit with acidic substances, medical agents, thinners, fuel, oils
or other chemicals. It may cause damage to the device.
INSTRUCTIONS FOR THE SAFE DISPOSAL OF BATTERIES.
A 9V battery is installed in the device.
Remove used batteries from the unit in the same way you put them in.
Return the batteries to a unit responsible for their disposal.
DISPOSAL OF USED UNITS.
At the end of its useful life, this product should not be disposed of with normal
household waste but should be taken to a collection point for the recycling of
electrical and electronic equipment. This is indicated by the symbol on the
product, operating instructions or packaging. The materials used in this appliance
are recyclable according to their marking. By reuse, recycling or applying other
forms of use of waste machines, you make a significant contribution to the
protection of our environment.
Your local administration will provide you with information about the appropriate
disposal point for used appliances.

Publicidad

loading