Metabo NFR 18 LTX 90 BL Manual Original página 16

en ENGLISH
Simultaneous nailing on both sides of a wall is
dangerous. Under no circumstances nail
simultaneously on both sides of a wall. This would
be dangerous because the nails could be fired
through the wall and thus cause injuries.
Do not use the tool in the "contact release
(continuous operation)" operating mode on
scaffolding or ladders. The tool must not be used
for particular applications, e.g.
- if changing the driving in location involves the use
of scaffolding, stairs, ladders or ladder-like
structures, e.g. roof battens.
- Closing of boxes or crates,
- appropriate transport safety systems, e.g. on
vehicles and trolleys.
Remove all remaining nails and the battery
pack from the tool, when:
1) you are carrying out maintenance and inspection
work,
2) your are checking the proper function of the
trigger safety lock and trigger,
3) you are clearing a jam,
4) the tool is not in use,
5) you are leaving the working area,
6) you are taking the tool to a different location,
7) you are handing the tool to another person.
Never try to remove a jam or repair the tool without
first having removed the battery pack and all
remaining nails from the tool.
Never leave the tool unattended, since people who
are not familiar with the tool could use it and injure
themselves.
Remove the battery pack from the tool when:
1) you are refilling nails,
2) you are setting the nailing depth.
The permissible operating temperature of this
tool is between 0°C and 40°C. Therefore, make
sure to operate the tool only within this
temperature range. It may happen that the tool
no longer functions below 0°C or above 40°C.
NEVER allow magnets (or similar magnetic
parts) to be next to the tool as the tool has a
magnetic sensor inside. This can lead to failure or
risk of injury caused by the malfunction.
Allow the tool to rest after continuous
operation.
The tool is equipped with a temperature
protection casing to protect the motor.
Continuous work can cause the temperature of
the tool to rise, which activates the
temperature protection circuit and
automatically stops operation. If this is the
case, allow the tool to cool down before using
it again.
Do not subject the keypad to strong vibrations
or damage it. This may lead to a malfunction
4.3 Icons
Do not use on scaffolds or ladders.
16
Wear ear protectors.
WARNING – Always wear protective
goggles.
Do not point the mouth of the tool at people.
Keep hands and feet away from the mouth
while working.
4.4 Use only suitable nails
Choose suitable nails according to the figure and
the technical data on page 3.
- Other types of nails may not be used. They may
cause the tool to malfunction and/or the nails to
break, which may result in serious injury.
- Use only smooth nails, barbed nails or ring-type
nails.
- Do not use threaded nails.
- Use paper-connected nail strips (angle: 30°-34°,
clipped nails).
- Handle nails and their packaging with care. If nails
are dropped, the connecting strip can tear,
resulting in faulty feeding of the nails and jams
thereof.
- Never use nail strips with more than 10 nails.
- Use intact nail strips with nails of uniform length.
4.5 Special safety instructions for cordless
machines:
Remove the battery pack from the machine before
making any adjustments, changing tools,
maintaining or cleaning.
Protect battery packs from water and
moisture!
Do not expose battery packs to fire!
Do not use faulty or deformed battery packs!
Do not open battery packs!
Do not touch or short circuit battery pack contacts!
A slightly acidic, flammable fluid may leak
from defective Li-Ion battery packs!
If battery fluid leaks out and comes into
contact with your skin, rinse immediately
with plenty of water. If battery fluid leaks out
and comes into contact with your eyes, wash them
with clean water and seek medical attention
immediately!
If the machine is defective, remove the battery pack
from the machine.
Transport of Li-Ion battery packs:
The shipping of Li-Ion battery packs is subject to
laws related to the carriage of hazardous goods (UN
3480 and UN 3481). Inform yourself of the currently
valid specifications when shipping Li-Ion battery
packs. If necessary, consult your freight forwarder.
Certified packaging is available from Metabo.
Only send the battery pack if the housing is intact
and no fluid is leaking. Remove the battery pack
from the machine for sending. Prevent the contacts