Descargar Imprimir esta página

Genie DLS5 Manual De Instrucciones página 11

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 27
Using the tare mode:
1.
Turn the scale on.
2.
"0g/0.0oz" will be shown on the display.
3.
Place an item on the weighing platform and read the value accordingly.
4.
Press the "TARE/ ON" again. The weight of this item will be eliminated, and the
reading will change to "0g/0.0oz".
5.
Place next item on the weighing platform and get the reading.
Note: The scale will display a negative reading when you remove all items. Press the
"TARE/ ON" key once and the negative reading will disappear.
Overload
When the loading capacity exceeds the maximum capacity (176 oz or 5 kg) of the
Digital Scale, "EEE" will be displayed on the LCD screen. Remove the item(s) from the
scale platform to avoid damage to the scale.
Power Off
1.
The scale can be power off manually by pressing the "TARE/ ON" key for 2
seconds
2.
The scale turns off automatically after being idle for one minute.
Maintenance
Clean with a soft cloth. Do not immerse directly into water or detergent, scrub with
abrasive material or use corrosive cleanser.
Technical Specifications
Maximum Capacity: 5 kg or 176 oz
Graduation: 1 g or 0.05 oz
Operating Temperature: 0°C ~ +40°C
Power Source: "CR2032" 3V Battery
Warranty
Dear customer,
We are delighted that you have chosen this equipment.
In the case of a defect, please return the device together with the receipt and
original packing material to the point of sale.
11

Publicidad

loading