EVGA BP Serie Guía Rápida página 4

Introduction: Premium Power
Precision is power, as the BP power supplies add another affordable option to EVGA's 80 PLUS ® Bronze-certified
lineup, while reducing the overall length to 120mm - EVGA's shortest ATX power supply to-date! The BP power supplies
feature a 115mm hydraulic bearing fan to ensure that staying cool and quiet is no tall order. Combining a full suite of
protections and EVGA's 3 Year Limited Warranty, this power supply should be on the short list for your next system build.
Safety Information
WARNING : This unit has no user-serviceable parts inside. Opening the casing presents a risk of electrocution and will void the
product's warranty. EVGA will not be responsible for any result of improper use, including but not limited to, any use of the
product outside of its intended purpose or use inconsistent with the warranty terms available online. (Warranty information is
available at www.evga.com/support/warranty and this manual is available at www.evga.com/manuals).
Features
STABLE POWER
The BP series has outstanding electrical performance with
This can help you achieve the highest possible overclock (optional) and provide the most stable and reliable power
to all components. The BP series also has high efficiency
®
PLUS BRONZE certified.
TOP QUALITY PROTECTIONS
The BP series comes equipped with the most comprehensive protection set possible, including Over Voltage
Protection (OVP), Under Voltage Protection (UVP), Over Power Protection (OPP), Short Circuit Protection (SCP),
Over Current Protection (OCP), and Over Temperature Protection (OTP). This product is also covered by 3-year
warranty and EVGA's legendary customer service and support.
Installation
1. Remove the power supply from its packaging.
2. Use the screws provided with your case to install the power supply into
your computer. NOTE :
the fan facing down. However, if your case places the power supply at the
bottom of the case and there are no ventilation holes available, it may be
best to install the power supply with the fan facing up for greater efficiency
and reliability.
It is recommended to install the power supply with
ultra stable voltage
up to 85% (115V~) / 88% (230V~) efficiency
02
and extremely clean power output.
and is 80