AKASO BRAVE 8 Manual Del Usuario página 19

EN
CONNECTING TO APP
To connect your camera to the AKASO GO APP, you need to connect the camera
Wifi which is enabled by default only when you start up the camera. It will be turned
off by default in other processes. If there is no connection within 5 minutes, the Wifi
will be automatically turned off. If you do not connect the app within 5 minutes, it
will be automatically disconnected. At this time, you can manually reconnect it.
1. Turn on Wifi in one of the three ways:
➀ Turn on the camera by default.
➁ Tap the Wifi icon on the quick menu.
➂ Turn on the wireless connection in the Settings.
2. Connect Wifi in one of the two ways:
➀ Swipe down to enter the quick menu, tap Preferences to enter the preferences
page, then scroll down to General Settings →Wireless Connection, turn on
Wireless Connection, then go to Camera Information. Wifi SSID and Password will
be shown on the screen. Go to your phone's Wifi settings, select "Brave 8_xxxx",
and enter the default password for connection.
14:54
Preferences
Wireless Connection
Wireless Connection
Connecting Device
Camrea Information
Wifi Band
Voice Control
Language
Standard
Code
Wireless Connection
Wifi
Wifi SSID:
Brave8-******
Wifi Password:
123456789
16