Descargar Imprimir esta página

Milwaukee M18 F2BL Manual Original página 9

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 17
TECHNICAL DATA
Type
Production code
Voltage battery
Rating input current
No-load speed
Air speed
Air fl ow rate
Weight according EPTA-Procedure 01/2014 (2 x 2.0 Ah ... 12.0 Ah)
Recommended ambient operating temperature
Recommended battery types
Recommended charger
Noise information: Measured values determined according
to EN 50636-2-100 Annex CC.
Typically, the A-weighted noise levels of the tool are:
Sound pressure level / Uncertainty K
Sound power level / Uncertainty K
Always wear ear protectors!
Vibration information: Total vibration values (vector sum in the
three axes) determined according to EN 50636-2-100 Annex BB.
Vibration emission value a
/ Uncertainty K
h
WARNING!
The vibration and noise emission level given in this information sheet has been measured in accordance with a standardized
test given in EN 50636-2-100 Annex BB and may be used to compare one tool with another. It may be used for a preliminary
assessment of exposure.
The declared vibration and noise emission level represents the main applications of the tool. However if the tool is used for
diff erent applications, with diff erent accessories or poorly maintained, the vibration and noise emission may diff er. This may
signifi cantly increase the exposure level over the total working period.
An estimation of the level of exposure to vibration and noise should also take into account the times when the tool is switched
off or when it is running but not actually doing the job. This may signifi cantly reduce the exposure level over the total working
period.
Identify additional safety measures to protect the operator from the eff ects of vibration and/or noise such as: maintain the tool
and the accessories, keep the hands warm, organization of work patterns.
WARNING Read these instructions carefully, be
familiar with the controls and the proper use of the
machine. Save all warnings and instructions for future
reference.
CORDLESS BLOWER SAFETY WARNINGS
Training
Read the instructions carefully. Be familiar with the controls
and the correct use of the machine.
Keep in mind, that the operator or user is responsible for
accidents or hazards occurring to other people or their
property.
Preparation
Obtain ear protection and safety glasses. Wear them at all
times while operating the machine.
While operating the machine always wear substantial
footwear and long trousers. Do not operate the machine
when barefoot or wearing open sandals. Avoid wearing
clothing that is loose fi tting or that has hanging cords or ties.
Do not wear loose clothing or jewellery that can be drawn into
the air inlet. Keep long hair away from the air inlets.
Operate the machine in a recommended position and only on
a fi rm, level surface.
Do not operate the machine on a paved or gravel surface
where ejected material could cause injury.
16
M18 F2BL
Cordless Garden Blower
491560 01 XXXXXX MJJJJ
2 x 18 V
25 A
0-16750 min
-1
0-233 km/h
0-17 m
3
/min
3,63 ... 5,90 kg
-18...+50 °C
M18B...; M18HB...
M12-18...; M1418C6
82,0 dB(A) / 3 dB(A)
90,8 dB(A) / 3 dB(A)
0,31 m/s
/ 1,5 m/s
2
2
Operation
Never operate the machine while people, especially children,
or pets are nearby.
Always stand clear of the discharge zone when operating this
machine.
If the machine becomes clogged, remove the battery before
cleaning debris.
Never operate the machine with defective guards or shields,
or without safety devices, for example debris collector in
place.
Stop the machine, and remove the battery from the tool.
Make sure that all moving parts have come to a complete
stop
- whenever you leave the machine,
- before clearing blockages or unclogging chute,
- before checking, cleaning or working on the machine.
The blower shall not be used for sucking!
Do not blow hot, fl ammable or explosive material.
Use the machine only in daylight or good artifi cial light.
Always be sure of your footing on slopes.
Never blow in the direction of bystanders. Do not operate
without tubes in place.
Walk, never run.
Keep all cooling air inlets clear of dirt.
Pay attention that bystanders are not injured through foreign
objects thrown from the machine.
ENGLISH
Do not use for sucking liquids!
Do not overreach and keep your balance at all times.
Do not use in the rain or leave outdoors while it is raining.
If the product is dropped, suff ers heavy impact, or begins to
vibrate abnormally, immediately stop the product and inspect
for damage or identify the cause of the vibration. Any damage
should be properly repaired or replaced by an authorised
service centre.
Maintenance and storage
When the machine is stopped for servicing, inspection, or
storage, or to change an accessory, remove the battery and
make sure that all moving parts are come to a complete stop.
Allow the machine to cool before making any inspections,
adjustments, etc. Maintain the machine with care and keep
it clean.
Store the machine in a dry place out of the reach of children.
Always allow the machine to cool before storing.
Do not modify this blower. Unauthorized modifi cations may
impair the safety of your product and may result in increased
noise and vibration.
Keep all nuts, bolts and screws tight to be sure that the
machine is in safe working condition.
Examine the machine and replace worn or damaged parts
for safety.
Replace worn or damaged parts for safety. Use only genuine
replacement parts and accessorises.
Never attempt to override the interlocked feature of the guard.
ADDITIONAL SAFETY
INSTRUCTIONS
Never allow children, persons with
reduced physical, sensory or mental
capabilities or lack of experience and
knowledge or people unfamiliar with
these instructions to use the machine,
local regulations may restrict the age of
the operator.
Children being supervised not to play
with the appliance.
Remove the battery pack before
starting any work on the machine.
Do not dispose of used battery packs
in the household refuse or by burning
them. Milwaukee Distributors off er to
retrieve old batteries to protect our
environment.
Do not store the battery pack together
with metal objects (short circuit risk).
Use only System M18 chargers for
charging System M18 battery packs.
Do not use battery packs from other
systems.
Battery acid may leak from damaged
batteries under extreme load or
extreme temperatures. In case of
contact with battery acid wash it off
immediately with soap and water. In
case of eye contact rinse thoroughly
for at least 10 minutes and immediately
seek medical attention.
Warning! To reduce the risk of fi re, personal injury, and
product damage due to a short circuit, never immerse your
tool, battery pack or charger in fl uid or allow a fl uid to fl ow
inside them. Corrosive or conductive fl uids, such as seawater,
certain industrial chemicals, and bleach or bleach containing
products, etc., can cause a short circuit.
RESIDUAL RISK
Even when the product is used as
prescribed, it is still impossible to
completely eliminate certain residual
risk factors. The following hazards may
arise in use and the operator should
pay special attention to avoid the
following:
• Injury caused by vibration
Hold the product by designated
handles and restrict working time and
exposure.
• Exposure to noise can cause hearing
injury
Wear ear protection and limit expo-
sure.
• Injury due to fl ying debris
Wear eye protection, heavy long trou-
sers, gloves and substancial footwear
at all times.
SPECIFIED CONDITIONS OF USE
The cordless blower is intended for
blowing of dirt and leaves.
Do not use this product in any other
way as stated for normal use.
ENGLISH
17

Publicidad

loading