Wurth Master AL 60-CL Instrucciones Para El Manejo página 6

AL 60-CL.book Seite 6 Donnerstag, 18. November 2004 3:50 15
GB
Working safely with this machine is pos-
sible only when the operating and safety
information are read completely and the
instructions contained therein are strictly
followed.
The battery charger must be operated in
dry rooms only and not in a wet environ-
ment. Wetness reduces the electrical safety
and increases the risk of an electrical
shock.
Before each use, check the unit and battery. If
damage is detected, do not use the unit. Have re-
pairs performed only by a qualified technician.
Before using the unit, read the safety instructions
on the unit, the adapter and the power tool.
Do not use the unit when the housing is dam-
aged. The missing protective insulation can enable
interior parts to be touched and lead to a danger-
ous electric shock.
Using adapters that are not recommended by
Würth can lead to an electric shock or cause inju-
ries.
Product Specification
Battery charger
Part number
Input voltage
Output voltage
Charging current (max.)
Charging time for 2.0 Ah-battery,
approx.
Weight, approx.
Protection class
Unit Elements
1 Charger
2 Latch
3 Charge contacts
4 Green charge control indicator
5 Red charge control indicator
6 Battery
Not all of the accessories illustrated or described are included
as standard delivery.
6
For Your Safety
Do not use the unit when the cable is damaged. A
damaged electric cable can cause a harmful electric
shock.
Do not cover the venting slots. The battery charger
can overheat, become damaged and cause a fire.
Do not charge batteries of other manufacturers. It
is possible that such batteries are not protected
against overheating and can explode or cause a
fire.
Do not charge non-rechargable batteries. Such
batteries can explode or cause a fire.
Do not operate the battery charger on easily in-
flammable surfaces or in combustible environ-
ments. The battery charger can become hot and
cause a fire.
Do not open the battery charger. Touching interi-
or parts can lead to a dangerous electric shock.
Use only original Würth parts and accessories.
For further notes on safety refer to enclosed sheet.
This battery charger is intended for the charging of
AL 60-CL
Würth CL batteries 2.0 Ah NiCd with voltages between
0700 871
19,2 V.
230 V
For damage caused by usage other then intended, the
19,2 V
user is responsible.
2,4 A
60 min
1,5 kg
The mains voltage and the data on the type plate
must agree.
(Protec-
II /
tive insulation)
The battery charger is fitted with a protection
device against overheating which protects against
overload.
Pay attention that the charge contacts 3 are protected
against debris and moisture, and that they are not
obstructed through foreign objects. Do not operate the
charger at locations where it is extremely hot or cold. It
operates best at normal room temperature.
For safety reasons, the battery of a new power tool is
delivered only with a low charge.
Connect the charger 1 to the mains supply and insert
the battery 6.
Charge the battery until the red LED 5 goes out and
the green LED 4 lights up continuously.
Use as Intended
Battery charging