Evolur STELLAR Manual Del Propietário página 16

BEDSIDE SLEEPER MODE
2
2a. Move the bedside sleeper
closer to parents' bed to
check the height of bedside
sleeper. The unzipped side of
bedside sleeper should
always be closer to the
mattress. The mattress
should be always aligned to
the bedside sleeper.
2b. To avoid injury from the
infant's neck being caught on
the top rail on the side that is
next to the parent's bed, the
top rail must be no higher
than parent's bed mattress.
2c. Pass the Fixing Belt (D) under
the bed to the other side and
pass it above the mattress by
pulling belts firmly until the
straps are in correct position
as shown in the diagram.
Tighten the Harness of the
Fixing Belt (D) until it clicks
into the place.
2d. Rotate the adjustable feet
inwards as shown in the
diagram to make sure the
bedside sleeper is closer to
the parent's bed in case the
bed used is a box bed.
16
"Click"
(D)
(D)
www.evolurbaby.com/help