Datos Complementarios; Homologación De Equipos Inalámbricos; Datos De Pedido; Sistema - Pilz PSEN cs2.13p ATEX Manual De Instrucciones

PSEN cs2.13p ATEX

Datos complementarios

Homologación de equipos inalámbricos
USA/Canada
VT8-PSENCS1
FCC ID:
7482A-PSENCS1
IC:
FCC/IC-Requirements:
This product complies with Part 15 of the FCC Rules and with Industry Canada licence-exempt RSS standards.
Operation is subject to the following two conditions:
1) this product may not cause harmful interference, and
2) this product must accept any interference received, including interference that may cause undesired operation.
Changes or modifications made to this product not expressly approved by Pilz may void the FCC authorization to operate this equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause
harmful interference in which case the user will be required to correct the interference at his own expense.
Le présent produit est conforme aux CNR d'Industrie Canada applicables aux appareils radio
exempts de licence. L'exploitation est autorisée aux deux conditions suivantes:
(1) le produit ne doit pas produire de brouillage, et
(2) l'utilisateur de le produit doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le
fonctionnement.

Datos de pedido

Sistema

Tipo de producto
PSEN cs2.13p/PSEN cs2.1
PSEN cs2.1
Manual de instrucciones PSEN cs2.13p ATEX
21133-ES-17
INFORMACIÓN
Los valores SIL/PL de una función de seguridad no son idénticos a los va-
lores SIL/PL de los dispositivos utilizados y pueden diferir de estos. Reco-
mendamos la herramienta de software PAScal para calcular los valores
SIL/PL de la función de seguridad.
Características
Interruptores de seguridad
con tecnología de transpon-
dedores, encriptado comple-
to, con accionador a una dis-
tancia de conmutación de
seguridad de 15 mm
Accionador con tecnología
de transpondedores
Tipo de conexión
Conector macho 8 polos
M12
N.º de pedido
540 105
540 180
| 30