Haden HB03001-US Manual De Instrucciones página 14

• If this does not remove the dirt, you can remove the lower plastic
part of the blender jug with the cutting blades from the glass part
of the blender jug
1. Remove the blender jug from the motor unit. For better stability,
remove the lid by turning it anticlockwise until you can pull it
off upwards.
2. Turn the blender jug upside down and turn the base of the blade
assembly anticlockwise so that it can be detached from the blender
jug.
3. Clean both parts in a mild soap solution or in the dishwasher.
4. You can carefully remove the sealing ring B from the inside of the
blade assembly if necessary. Clean in mild soapy water and rinse
with clean water. The blades are sharp be careful.
5. Dry all parts thoroughly before reassembling them.
6. If removed, reinsert the sealing ring into the blade assembly
correctly. The blade assembly can be inserted back into the blender
jug and turned clockwise to secure.
14
www.hadenusa.com
Blades assembly
Sealing ring
Blender jug