PNI SmartHome WP202 Manual De Usuario página 3

Warnings
» To prevent the risk of electric shock, it is important to
disconnect the general safety of the house before starting
the installation of the socket.
» Do not work on the outlet if it is connected to the current.
» This outlet must only be installed by an authorized
electrician.
» It is important to make all connections according to the
connection diagram below.
» At the end of the assembly, make sure that the wires are
not stressed and that the screws are well tightened.
» The outlet must be grounded and the grounding cables
must be properly insulated.
Technical specifications
» Rated voltage: 100V-240V
» Rated current: max. 16
» Maximum load: 3600W
» Standby current: ≤ 0.3W
» Output:
PD max. 20W
USB-A: DC5V/3A, DC9V/2A, 12V/1.5A
USB-C: DC5V/3A, DC9V/2.22A, DC12V/1.67A
USB-A+USB-C: 5V/3.4A Max
User manual - 3