Descargar Imprimir esta página

TDS HELIOS 12000 Manual De Instrucciones

Publicidad

Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

www.tdsdive.com
Manual content
Instruction
How to use
- Component
- To install the battery
- Specifications
- Operating Instructions
- Unpacking
- Thermal protection
- Battery Level Indicator
- To charge the battery
Specifications
white Light : LED Vero 29 BXRC-56G10K0-D-74
LED
CRI:Ra 90/5600K
Parameters
Brightness
Wide Light : 12000 Lm
(Lumen)
Beam Angle
Wide >120 Degress
(In water)
Battery
8 x 18650 Li - ion batteries (6800mAh)
Run time
approx. 60min
Depth Rating
100m / 330ft
Over 50000 hours
LED Life
Material
Aviation aluminum
Wide >120 Degress
Oxidation
Size
71 (D) x 209 (L) mm
Weight
950g land (Include the battery)
480g in water (Include the battery)
LED Lights
Light head
led 12000 LM
Maintenance and Warranty
- General Maintenance
- Warning
- Warranty
- Troubles Shooting
Please read the manual carefully
before using the video light
www.tdsdive.com
USER MANUAL
Component
Tail Cap
Switch Button
Light Head
Unpacking
1
2
4
5
To install the battery
1. Turn the tail cap counter-clockwise to open.
2. Loading the Li-ion battery into the tail cap, make sure the
polarity battery must match the polarity of the diving light
contacts.
3. Turn the tail cap clockwise to reattach the tail to the head
of the video light.
Tail Cap
Operating Instructions
Turn ON: Press the Button and hold it down for 1 second
the power and the indicator will be on,then Press and
immediately release the Button.it will be at 100% brightness.
Turn OFF: Press the Button and hold it down for more than
2 seconds.
Battery Level Indicator
YS Adapter
Video light
1
3
Li-ion battery
2
Charger
3
O Ring
4
Ball mount
5
6
YS Adapter
6
DC charger plug

Publicidad

loading

Resumen de contenidos para TDS HELIOS 12000

  • Página 1 www.tdsdive.com www.tdsdive.com USER MANUAL Manual content Component Tail Cap Instruction How to use Maintenance and Warranty - Component - To install the battery - General Maintenance - Specifications - Operating Instructions - Warning Switch Button - Unpacking - Thermal protection - Warranty - Battery Level Indicator - Troubles Shooting...
  • Página 2 Adjustment brightness: Thermal protection When being used at a temperature higher than 50~55°C When the light is on: Press and immediately release the Button. and the temperature protection function will be on, and the brightness change 20%. 100% When the temperature is lower than 40°C, the temperature protection function will be off, and the brightness is restored.
  • Página 3 www.tdsdive.com www.tdsdive.com MANUAL DE INSTRUCCIONES Contenido del manual Componentes Instrucciones Modo de empleo Mantenimiento y garantía Tapa trasera - Componentes - Para instalar la batería - Mantenimiento general - Especificaciones - Instrucciones de uso - Advertencias Botón interruptor - Desembalaje - Protección térmica - Garantía - Indicador del nivel de la batería...
  • Página 4 Ajustes de potencia: Protección automática contra el sobrecalentamiento Si se utiliza a una temperatura superior a 50~55°C la función Cuando la luz está encendida: Pulse y suelte inmediatamente de protección contra la temperatura se activará, y la el botón. potencia cambiará al 20%. 100% Cuando la temperatura es inferior a 40°C, la función de protección de la temperatura se desactivará...