TDS HELIOS 6000 Manual

www.tdsdive.com
Manual content
Instructions How to use
- Component - To install the battery
- Specifications - Operating Instructions
- Unpacking - Battery Level Indicator
- Automatic Overheat Protection
- To charge the battery
Specifications
Wide Light： 1x CXB2540 5000k Ra92 110 °
LED Spot Light： 1x 8°Spot Light LED
Parameters Red Light： 6x LED CREE XB-D N4 620nm
Blue Light：8x LED CREE XB-D M2 465nm
Brightness
Wide Light：5000 Lm / Spot Light：300 Lm
(Lumen)
Turbo light 6000Lm
Battery 4 x 18650 Li-ion battery pack
Run time Wide Light：approx 55 min 、Spot Light: 300+ min
Turbo light：30min
Depth Rating 100m / 330ft
LED Life Over 50000 hours
Material Aviation aluminum
Oxidation Hard anodic oxidation
Size 57 (D) x 128 (L) mm
485g land (Include the battery)
Weight
230g in water (Include the battery)
LED Lights
Wide Light
Red Light (6pcs)
Maintenance and Warranty
- General Maintenance
- Warning
- Warranty
- Troubles Shooting
Please read the manual carefully
before using the video light
Blue Light (8pcs)
Spot Light
www.tdsdive.com
USER MANUAL
Component
Tail Cap
Switch Button
Light Head
Unpacking
1 2
4 5
To install the battery
1.Turn the tail cap counter-clockwise to open.
2.Loading the Li-ion battery into the tail cap, make sure the
polarity battery must match the polarity of the diving light
contacts.
3.Turn the tail cap clockwise to reattach the tail to the head
of the video light.
Tail Cap
Operating Instructions
Turn ON：Pressing the Switch Button for 1 second.
(Start wide light：100% brightness)
Turn OFF：Pressing the Switch Button for 3 seconds.
( Switch from current mode to next mode before turning off )
U P D A T E I N S T R U C T I O N S
Battery Level Indicator
YS Adapter
Video light
1
3
Li-ion battery
2
Charger
3
O Ring
4
Ball mount
5
6
YS Adapter
6
DC charger plug