Arkansas 12 / Arkansas 15
IMPORTANT SAFETY SYMBOLS
lntended to alert the user to the presence of uninsulated "dangerous voltage"
within the product's enclosure that may be of sufficient magnitude to constitute a
risk of electric shock to persons.
lntended to alert the user of the presence of important operating and
maintenance (servicing) instructions in the literature accompanying the product.
CAUTION: Risk of electrical shock - DO NOT OPEN!
CAUTION: To reduce the risk of electric shock, do not remove cover. No user serviceable
parts inside. Refer servicing to qualified service personnel.
WARNING: To prevent electrical shock or fire hazard, this apparatus should not be exposed
to rain or moisture, and objects filled with liquids, such as vases,should not be placed on this
apparatus. Befare using this apparatus, read the operating guide for further warnings.
Protective earthing terminal. The apparatus should be connected to a mains
socket outlet with a protective earthing connection.
IMPORTANT SAFETY INSTRUCTIONS
WARNING: When using electrical products, basic cautions should always be followed,
including the following:
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any of the ventilation openings. lnstall in accordance with manufacturer's
instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves or other
apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized
plug has two blades with one wider than the other. A grounding type plug has two blades
and a third grounding plug. The wide blade or third prong is provided for your safety. lf the
provided plug does not fit into your outlet, consult an electrician for replacement of the
obsolete outlet.
10. Protect the power cord from being walked on or pinched, particularly at plugs,
convenience receptacles, and the point they exit from the apparatus.
11. Only use attachments/ accessories provided by the manufacturer.
12. Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or
sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus
combination to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or when unused for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus
has been damaged in any way, such as power-supply cord or plug is damaged, liquid has
been spilled or objects have fallen into the apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or has been dropped.
1
CAUTION
1.Master Vol
Esta perilla se usa para ajustar la salida total del producto completo
2.2-Band EQ
Agudos: esta perilla se usa para ajustar la frecuencia alta
Bajo: esta perilla se usa para ajustar la frecuencia baja
3. Line Vol
Este mando se utiliza para ajustar la salida de la línea in
4. Mic Vol
Esta perilla se usa para ajustar la salida de Mic in
5. Line in ( 1/4" jack & RCA )
Esta entrada se utiliza para conectar el cable de audio para obtener la señal del
reproductor de CD u otros dispositivos
6. Mic in ( XLR )
Esta entrada se usa para enchufar el cable del micrófono para obtener la señal del
micrófono dinámico
7.Link out
Esta entrada se utiliza para enviar la señal a otra caja de altavoz o amplificador activo
8. Speakon out
Esta entrada se usa para conectar a otra caja de parlantes pasiva # 8 OHM y conducirla
directamente
9. Power switch
Encender/apagar la fuente de alimentación del producto
10. AC Power Socket
Se utiliza para conectar la fuente de alimentación a la unidad a través del cable de
alimentación incluido.
11. Fuse Holder
El portafusible es para contener el fusible, que es un dispositivo de seguridad que protege el
circuito de alimentación de CA de la unidad.
Precaución: si se funde el fusible, debe reemplazarse por uno del mismo tipo y
especificación. si el fusible continúa quemándose, deje de usarlo y solicite el servicio a
personal calificado
12. Instrucciones del reproductor de MP3
(1) Mode
Presione el botón de modo para elegir los modos de trabajo en el reproductor de mp3
como USB/SD/FM/Bluetooth, si presiona el botón de modo durante unos segundos, ingresará
al modo de pista de carpeta.
(2) PIay/Pause
Presione este botón para reproducir el reproductor de mp3 o pausar el reproductor de mp3,
cuando el reproductor de mp3 funcione en modo FM, presione este botón para escanear
las estaciones automáticamente
(3) Stop
Presione este botón para detener el reproductor de mp3
(4)RecycIe
Presione este botón para reproducir música reciclar
(5)Backward
Presione este botón para reproducir la última canción o buscar la última estación de FM
(6)Forward
Presione este botón para reproducir la siguiente canción o buscar la siguiente estación FM
USER´S
MANUAL
MANUAL
DE USUARIO
2