FONRI SMART FLOOD SENSOR Guia Del Usuario página 5

Device Status
Pairing with Wi-Fi The light flashes quickly
AP mode
Triggered
Closed
Reset
Factory Reset
(Reset)
Press and hold the "Reset" button for 6
seconds until the light starts to flash fast.
Then the device will go into the Wi-Fi pair-
ing mode.
Press and hold the "Reset" button for an-
other 6 seconds until the light starts to flash
slowly. Then the device will go into the AP
pairing mode.
LED Status
The light flashes slowly
The light turns on
The light turns off
The light turns on for 4
seconds and 2 seconds
after it turns off, the device
goes into setup mode.
5