4
4
12. Glue the Wood Dowels (4) into the inner holes on the Right Side Frame (B), the Drawer Box Left Panel
(C) and the Drawer Box Back Panel (D).
13. Fit the Crossbar (J) onto the middle front U-shaped bracket on the Right Side Frame (B).
14. Insert one 15 mm Bolt (8) with the Lock Washer (10) and Flat Washer (11) through the metal tube and
screw into the U-shaped bracket.
15. Repeat the same procedure to attach the Drawer Box Back Panel (D) to the back post of the Right Side
Frame (B).
Assembly Instructions
4
C
4
D
11
10
8
4
4
4
B
D
12
4
The mounting hole on the metal
tab overlap the pilot hole
B
J