Astell & Kern AK UW100 Guia De Inicio Rapido página 7

LED indicator (Charging case)
Color
Blue: Blinks repeatedly
Blue: Turns off
Green: Blinks repeatedly
Green: Turns off
Blue/Green: Blinks repeatedly in turn
Blue/Green: Turns off
Red: Blinks repeatedly
If the LED indicator on the charging case does not turn on, remove the earbuds from the charging case
and place them back in correctly, or disconnect the charging case from the charger and try again.
If the charging indicator continues to blink quickly in red, stop charging and contact us for service or
repair.
LED indicator (Earbuds)
Color
Blue LED: Blinks every second
Blue LED: Blinks every three seconds
Red LED only: Blinks every three seconds
The exact battery level can be checked using the app.
Status
Earbuds: Charging in progress
Earbuds: Charging complete
Cradle: Charging in progress
Cradle: Charging complete
Earbuds/Cradle: Charging in progress (Both)
Earbuds/Cradle: Charging complete (Both)
Battery level: 10% or less
Status
Pairing mode
Pairing status: Normal
Battery level: 10% or less
Connecting to a mobile device
1. When the earbud is removed from the charging case, it automatically powers on and enters pairing
standby mode.
2. Turn on the Bluetooth feature on your mobile device: [Settings > Connections > Bluetooth]
3. Select [AK UW100] when it appears in the device search to complete pairing with your mobile device.
4. The earbuds turn off automatically when they are placed inside the charging case.
A device only needs to be paired once and will subsequently connect automatically.
If the earbuds and mobile device are not connected / If the connection pop-up window does not appear/
If the earbuds are not detected from the mobile device: Wear the earbuds and touch one earbud for 3
seconds to enter Bluetooth pairing mode. A sound will notify that the earbuds have entered Bluetooth
pairing mode.
Bluetooth pairing mode will turn off if the earbuds and mobile device are not connected within 3
minutes outside the range. If you put the product in the charging case and take it out, the earbuds will
enter Bluetooth pairing mode.
Make sure to check and adjust the Bluetooth volume to the appropriate level after pairing is complete.
A high volume can cause hearing damage.
When connecting the product to a device, make sure the product is located close to the device. Failing to
do so may cause malfunction or noise depending on the user's environment.
Disconnecting from your mobile device
1. You can disconnect the Bluetooth connection to the mobile device by placing the earbuds in the charging case.
You can also manually disconnect the earbuds by unregistering them in [Settings > Connections >
Bluetooth] on your mobile device.
To reconnect the temporarily disconnected earbuds to your mobile device, Press one earbud for 3
seconds to enter Bluetooth pairing mode.