xjump XJ 50 Guía De Usuario página 13

CHARGING
The speaker must be recharged when switched Off.
Insert one end of the power cord into the DC IN (7) port of the device and the other end USB into
the standard 5V 1A cherging port; in charging the RED Led (3) will be On. After fully charged, the
RED Led will be Off.
This device is inbuilt with charge protection circuit, which can be connected to PC or changer for
long time; it will take about 3h to charge the battery fully; the endurance of the battery depends
on low or high volume.
Note: When the battery is low, the device will emit a warning sound for a few times before automatical-
ly turning off.
POWER ON/ OFF
To switch on the speaker, press and hold the button To switch on the speaker, press and hold the button
To turn off the speaker, press and hold the button
VOLUME ADJUSTMENT
Press the key (6) several times to decrease the volume, or the key
BLUETOOTH
BLUETOOTH CONNECTION METHODS
1. Switch On the speaker, Blue Led indicator (8) flash;
2. Activate the Bluetooth name "XJ 50" on the mobile device (mobile phone, PC, Tablet) to search
Bluetooth device;
3. With manual click, the device will automatically pair and connect: successful connection will
(2) for 4 seconds.
(2) for 4 seconds.
(4) to increase the volume.
English
13