Michele RONDA 703 Instrucciones página 7

Chronograph: Intermediate or Interval Timing
1. Press pusher A to start the center stop-second hand.
2. Press pusher B to stop the chronograph.
*NOTE: Although the chronograph hands have stopped, the movement continues to record
the current timing.
3. Make up the measured time:
Press pusher B again and the 3 chronograph hands are quickly advanced to the
ongoing measured time. To continue to record intervals, continue to push pusher B.
4. Press pusher A to stop and the final time is displayed.
5. To reset the three chronograph hands to zero positioning, press pusher B.
Adjusting the Chronograph Hand to Zero
1. Pull crown out to position II (all 3 hands are in their correct or incorrect position).
2. Press pusher B to single step the minute counter hand. Press and hold pusher B to
advance the minute counter hand quickly.
3. Pull crown out to position III.
4. Press pusher A to single step the center stop-second hand. Press and hold pusher
A to advance the center stop-second hand quickly.
5. Press pusher B to single step the 1/10 second hand. Press and hold pusher B to
advance the 1/10 second hand quickly.
6. Return the crown to position I.
12
CHRONOGRAPH MODELS (ISA 8171/204)
Chronograph Minute
Hand
Chronograph 1/5
Second Hand
Moonphase
Time Setting
1. Pull crown out to position 3.
2. Rotate crown to set correct am/pm time.
3. Return crown to position 1.
Date and Moonphase Setting
1. Pull crown out to position 2.
2. Rotate crown clockwise and the set date according to the last full moon.
3. Continue to rotate crown clockwise to set the date.
4. Return crown to position 1.
NOTE: Do not set the date between 9:00 p.m. and 12:30 a.m. to ensure accuracy.
Chronograph Operation
1. Press A to start/stop the chronograph.
2. Press B to reset.
NOTE: After 2 hours of continuous running, the chronograph will automatically stop
and reset to save the battery.
Second Hand
Pusher A
I II III
Crown
(Position I, II, III)
Pusher B
Date Indicator
13