ErgoAV ERTSM2-01B Manual De Instrucciones página 10

Supplied Part and Hardware for Step 4
1
TV Plate
Step 4 Connect the TV Plate [1] to Upper Support Pillar [4]
Note: Before attaching the TV Mounting Plate to the pillar, measure the
distance from the upper hook on the TV Bracket to the bottom of the TV.
Then refer to chart below for the recommended mounting location. To add an
additional 2" of space between your TV and the base, use the lower hooks
located on the TV Brackets. We always recommend using the lowest possible
attachment location for the safest assembly.
Distance from the hooks on the TV
Brackets to the bottom of the TV
Less Than 15 1/2"
x1
17" to 18 1/2"
15 1/2" to 17"
(O) x4
M6 Nut
Recommended TV Mounting
Plate Location
Location #1
Location #2
Location #3
10
(N) x1
M6-M10
Wrench