Publicidad
Idiomas disponibles
Idiomas disponibles
Use instructions / English
Description:
Canister pump for transferring and filling of diesel, heating oil, hydraulic, engine and gear oil.
Pump and container in stable metal design. The pump holder is suitable for 20 / 25l plastic canisters.
Any other use of the canister pump is expressly excluded.
Delivery:
Pumping station with 1.5 m rubber hose and ball stopcock.
Pump holder for 20 / 25l plastic canister.
Foam sleeve.
Technical specifications
Conveying capacity approx. 0.2 litres / stroke.
Suction pipe -Ø:
40 mm
Suction pipe length: 525 mm
Seals:
NBR / Perbunan
Weight:
approx.. 3.8 kg
Pumping medium:
See the resistance list
Not for water, chemicals or contaminated media.
Service:
- Open the canister and remove the plastic closure.
- Place the foam sleeve on the canister opening.
- Fix the pump holder to the canister by means of wing screws
of the clamping pieces to the canister.
- Push the pump tube through the clamp of the pump holder and
the foam cuff down to the canister floor
pieces Tighten thumbscrew of clamp.
- Tighten the wing screws of the pump holder.
- The pump is now ready for operation.
Safety instructions:
Failure to follow the safety instructions
can result in a hazard to people, the environment and the
plant Failure to follow the safety instructions
notices may lead to the loss of any claim for damages.
The operator of the facility must ensure that the content of the
operating instructions, especially the safety instructions
are known to the operating personnel.
Ensure a secure position for the metal drum and the
proper attachment of the pump.
Never operate the pump with "force".
Replace damaged parts immediately.
Observe the nationally applicable regulations for the handling of water-polluting substances.
Maintenance and Care:
The canister pump is maintenance-free.
Warranty:
If the operating instructions and the intended use of the system are observed, we are liable
within the scope of the statutory warranty obligation (see our terms of delivery).
For warranty claims, please include the invoice of your dealer with date of purchase.
( without canister)
Ball valve
1.5m discharge hose
Clamp
Pump holder
foam
cuff
Wing
screws
Push
clamp
5
Publicidad
