Publicidad
Idiomas disponibles
Idiomas disponibles
www.tmelectron.com
tes. The LED indicator on the control unit 1 shows "A".
• First select position "0" and after approx. 5 seconds select the required
temperature level to switch the heating pad back on.
• Switch the heating pad off (Level "0") or take the mains plug out of the soc-
ket if you do not wish to use the heating pad after automatic switch-off. To use
plug-in connector 2 and the plug for the control unit 3 together (see Fig. B).
5. Cleaning and maintenance
- Use the heating pad with the textile cover to prevent soiling or damage to
the device (particularly if using essential oils and creams).
- Before cleaning the heating pad, always pull the mains plug out of the mains
socket and separate the plug-in connector 2 from the plug for the control unit
3 (see Fig. B).
- Do not reconnect the control 1 to the heating pad until the plug-in connector
2 and the heating pad are completely dry.
- Do not, under any circumstances, switch on the heating pad to dry it.
- Do not use chemical cleaners or scouring agents to clean the heating pad or
the control unit 1. Otherwise the heating pad could be damaged.
- Never immerse the control unit 1 in water or other liquids.
- Do not hang the heating pad up to dry with pegs or similar. The heating pad
the heating pad and the control unit 1.
- To remove stubborn dirt from the heating pad, you can dampen the cloth or
moisten it with a little mild liquid detergent.
- First open the Velcro on the textile cover and take out the heating pad.
- Clean the textile cover in accordance with the cleaning symbols on the label.
- The heating pad and removable cover are machine washable. Set the was-
hing machine on a gentle 30 °C washing program.
- Do not bleach. Do not use detergents containing bleach (such as full tem-
perature range washing powders or liquids).
21
ENGLISH
Publicidad
