Blinc BL A2 Manual De Referencia Rápida página 5

pairing has completed, select the Blinc-A2 in the list of the
devices on your first Bluetooth device or mobile phone.
After the first Bluetooth device or mobile phone confirms the
pairing has completed and the Blinc-A2 is ready to use for two
Bluetooth devices or mobile phones.
Intercom
The BLINC-A2 can be paired with another headset for Bluetooth
intercom conversation.
1. Turn on the two Blinc-A2 headsets (A and B) that you
would like to pair with each other
2. Press and hold the "Power" button of the headset A and
B for 2 seconds until the LED flashes red and blue alternately.
You will hear a voice prompt saying "pairing"
3. Simply press the "Power" button in only one headset (it
doesn't matter that you choose A or B) you will hear a voice
prompt saying "Searching" and wait until the LEDs of both
headsets turn to blue and intercom connection is automatically
established, and after you will hear a voice prompt "Pairing
successful". Procedure is completed.
If the pairing process is not completed within two minutes, the
Blinc-A2 will return to stand-by mode.
To use Intercom simply press "Power" button in only one
headset, you will hear "Intercom connected"; if you press
"Power" button on both headset, intercom will not start.
Connection with phone
Blinc-A2 will connect with your phone automatically when you
turn on. If Blinc-A2 is turn on, you can simply press "Phone"
button, it will connect with your phone
Voice Commands
Press and hold "Phone" button for 2 seconds in stand-by mode
that will start voice commands on your smartphone.
EN
5