GREENBLUE GB540 Manual Del Usuario página 3

7. Confirm your setting by pressing the "MODE" button. The year indicator flashes in the
time display. Press the "UP" or "DOWN" button to set the desired value.
8. Confirm your setting by pressing the "MODE" button. The month indicator flashes in the
date display. Press the "UP" or "DOWN" button to set the desired value.
9. Confirm your setting by pressing the "MODE" button. The day indicator flashes in the
date display. Press the "UP" or "DOWN" button to set the desired value.
10. Confirm your setting by pressing the "MODE" button. At the place of the day of the
week display, the language indicator of this display flashes. Press the "UP" or "DOWN"
button to choose the desired language. Note: You have the choice of German (GE), English
(EN), Italian (IT), French (FR) and Spanish (SP)
11. Confirm your setting by pressing the "MODE" button.
Setting the alarm time: 1. Press the "MODE" button briefly in order to get to alarm mode.
The currently set waking time appears in the LCD display. 2. Press and hold down the
"MODE" button for about 2 seconds. The hours display flashes. 3. Press the "UP" or
"DOWN" button to set the desired value. 4. Confirm your setting by pressing the MODE
button. The minutes display flashes. Repeat step 3 to set the minutes.
5. Confirm your setting by pressing the MODE button. Tip: Hold the UP or DOWN button
pressed down. This will speed up the process of setting the values. You can also use this
fast setting option for subsequent settings. If you do not press any button for 20 sec. the
LCD reverts to the standard display. Note: You can set two different alarms separately.
6. Press the "MODE" button twice briefly if the weather station is in time display mode.
Press the "MODE" button once briefly if the weather station is in ALARM 1 mode. This
brings you now to ALARM 2 mode. 7. Repeat steps 2–5 to set the value for ALARM2.
Activating / deactivating the alarm function: 1. Briefly press the MODE button briefly
once or twice to reach ALARM1 or ALARM2 mode. 2. Press the "UP" button. The ALARM1
symbol or ALARM 2 symbol appears in the LCD display. The alarm has been activated.
3. Press the button "UP" again. The ALARM 1 or ALARM 2 symbol in the LCD display goes
out. The alarm has been deactivated. Switching off the alarm signal: Press any button
except the "SNOOZE/LIGHT" button to stop the alarm signal. It is not necessary to
reactivate the alarm. It switches itself automatically to the alarm time which has already
been set.Note: The alarm signal sounds for approx. 2 minutes.
SNOOZE function: Press the "SNOOZE/LIGHT" button as the alarm signal sounds to get to
SNOOZE mode. The alarm signal sounds again after approx. 5 minutes.
Preparing to use the weather forecasting function: Note: The weather station
calculates a weather forecast for about the next 6-12 hours based on the barometric
pressure trend. Of course this forecast can't compare to that of professional weather
services supported by satellites and high performance computers, It provides only an
approximate indication of the current weather development in a small local area. Please
take the weather forecast from your local weather forecasting service into account as well
- 04 -
as the forecast from your weather station. If there are discrepancies between the
information from your device and from the local weather forecasting service, please take
the advice of the latter as authoritative. The weather forecast is calculated from evaluation
of fluctuations in the barometric pressure and may deviate from the actual weather
conditions.
The weather station displays the following weather symbols: sunny slightly, cloudy, cloudy,
rainy, rain+snow. The weather symbols indicate the weather fluctuation over the next 6-12
hours and not the current weather. After the weather station needs 7-10 days of air
pressure calibration, the weather forecast will tend to be stable with an accuracy rate of
70%-75%. The weather station can display the barometric pressure trend.
You may see the following displays: • The barometric pressure will rise
• The barometric pressure will remain constant. • The barometric pressure will fall
Moon phases: The weather station has a display which automatically displays the current
moon phase. New moon, Waxing halfmoon, Half-moon, Waxing full moon, Full moon,
Waning full moon, Half-moon, Waning half moon
Reading the barometric pressure for the last 12 hours: • Press the "HISTORY" button
repeatedly to read the barometric pressure values for the last 12 hours. 0HR = present
barometric pressure –1HR = barometric pressure an hour earlier –2HR = barometric
pressure two hours earlier –12HR = barometric pressure twelve hours earlier, etc.
Adjusting the air pressure indication: The forecast of this weather station is basing on
an analysis of the change of the air pressure. The barometric pressure is factory provided
adjusted to the absolute air pressure. As the air pressure generally decreases with the
height beyond sea level, the public weather service always announces the so-called
relative air pressure. This relati veair pressure is adjusted to the topography of the country
in order to get comparable values. You can adjust the air-pressure of your weather station
to the proportion of its place. For that you have to adjust your weather station uniquely the
current air pressure. Ask your local weather forecast service for the barometric pressure at
sea level or get the current value from the Internet.You can adjust the weather station like
this: • Press and hold the "HISTORY" button for approx. 3 seconds. After that press the
"UP" or "DOWN" button to interchange between the absolute or relative air pressure.
• Chose „Rel" and press the "HISTORY" button for confirmation. The air pressure indication
blinks. Now you can chose the correct value by pressing the "UP" or "DOWN" button.
• Confirm your choice by pressing the "HISTORY" button. Your weather station now shows
the relative air pressure. If you want your weather station to announce the absolute air
pressure, proceed like this: • Press and hold the "HISTORY" button for approx. 3 sec.
Afterwards press the "UP" or "DOWN" button, to change to the absolute air pressure.
Confirm by pressing the "HISTORY" button.
-05-