XD Design P326.212 Manual Del Usuario página 3

ENGLISH
Features
• Bluetooth V4.1 +EDR
• High quality Embedded 48MIPS dual-MAC DSP coprocessor
• Support for noise reduction and echo cancellation
• Integrated 600 mAh battery case to charge on the go about 6-8 times
• Play time up to 2,5 hours on one charge
• Two simple methods to pair both devices
1.
1. Red and blue LED indicator
2.
2. Silicon
3. Microphone
4. Charging and power capacity indicator
5. On-off switch
4.
6. Micro USB
5.
7. USB, output 5V, 200mA
3.
Method 1
Switch on the left side
6.
Attention: wait for about 5s
7.
Switch slid to the right side
1. Auto power on
2. The master (the earbud connected to your device) will connect to the slave, red and
blue LED of master is flashing alternately when successful
Scan your device and try to connect
1. Turn on Bluetooth on your cell phone
2. Go to Bluetooth settings on your phone and check the available devices
3. You will see the name " Navigator Earphone"
4. Click the device name
5. Your phone will connect to the headset
Enjoy your music
3
P326212_True_Wireless_Double_Earbuds_Manual.indd 3 26-9-2016 10:28:40