Publicidad
Idiomas disponibles
Idiomas disponibles
-To fit the bed rail the small bars with straps C, which form the feet of the bed rail, should be collapsed down and inserted under
the mattress and over the bed base.
-Make sure you know the width of the mattress and adjust the safety straps accordingly. The oval-shaped part should be fastened
to the other side of the bed rail, across the width of the mattress.
-The length of these straps can be adjusted using the adjustment buckle.
To install on bed:
Keeping the bed rail upright, slide the bed rail feet beneath the mattress. (It may be necessary to lift the edge of the mattress to
position Bed railfeet easily). Push bed rail all the way in until it is flush against the side of the mattress.
WARNING
To prevent the risk of strangulation, it is essential to ensure that when the bedguard is fitted into position, there is a gap of at least
250 mm, between each end of the bed and the corresponding end of the bedguard (fig. 1).
1. Position the bed rail so that the distance between the end of the bed rail
and the headboard is at least 25 cm (10 inches) wide.
2. Bed rail must securely touches the side of mattress tightly and the fixings
are all in places.
3. Top edge of bed rail must be at least 16 cm (6,3 inches) above top edge of
mattress.
4.Fix the oval-shape plate to the edge on the other side of the
mattress away from the bed rail.
The length of the strap can be adjusted using the clasp.
NOTE: So that the barrier is secure, make sure that the fixed
strap is fastened firmly and tightly.
COLLAPSIBLE FUNCTION
5.
To fold the rail down: lift the handles up on both sides to
unlock it. When the child is asleep, to prevent him/her from
falling out of bed, fold the bed rail up at both ends until
it is locked in place by the side pivots. (See figure 5)
How to dismantle for storage
1- Remove the bed rail from the bed.
2- To dismantle the rail follow the assembly steps in reverse order.
3- The cover of the bed rail is detachable. To take the cover off follow the same steps
in reverse order. The fabric cover can be washed by hand or machine washed at a
low temperature.
4- Clean the metal bars with a damp cloth.
Net
Mattress width
Oval shape plate
4
mattress
bed
5
headboard
25 cm (10")
16 cm (6,3")
bed rail
bed rail
oval shaped part
mattress
5
Publicidad
