Publicidad
Idiomas disponibles
Idiomas disponibles
Using the libellas (B), level the structure by turning the leveling screws (J) on the
base - tighten their nuts only after leveling.
Finally, you can attach the drilling machine to the stand - use the included mounting
kit if necessary. Connect with the vacuum pump via the pneumatic quick coupler
(the male end is located in the base - the pneumatic module). Before first use,
lubricate (e.g. with universal grease) the treadmill on the column to ensure smooth
and trouble-free operation of the device, in particular, the movement of the trolley.
3.3.
Working with the device
•
Attach the drilling machine to the trolley (C) of the machine.
Stabilize the structure using the leveling screws (J) and the libella (B)
•
located on the trolley.
Unscrew the inlet valve on the air module (G) and start the pump.
•
Publicidad
