Publicidad
Idiomas disponibles
Idiomas disponibles
After the stand is fully sucked to the ground, if necessary, correct the
•
level (using, among others, a libella).
•
Drilling can begin.
3.4.
Cleaning and maintenance
a)
Use only non-corrosive cleaning agents for cleaning the surfaces.
b)
Store the unit in a dry and cool place protected from moisture and direct
sunlight.
c)
Do not spray the unit with a stream of water or immerse it in water.
d)
Perform regular inspections of the unit, checking technical fitness and any
damages.
e)
Use a soft, damp cloth for cleaning.
f)
Do not use sharp and/or metal objects (e.g. wire brush or metal spatula) for
cleaning as they may damage the surface of the appliance material.
g)
Regularly lubricate the guides and elements on which the trolley moves.
h)
Clean the device after each use.
Publicidad
