Anker 6 Serie Manual Del Usuario página 3

Item
1. USB-C Upstream Port
2. DC-IN Port
3. 2× USB-A 3.2 Gen 2 Port
4. Ethernet Port
5. HDMI Port
6. Wireless Charging Pad
7. Wireless Charging Indicator
8. 2× USB-C 3.2 Gen 2 Port
9. USB-A 3.2 Gen 2 Port
10. SD / microSD Card Slot
11. Audio In / Out
12. LED Indicator and Power Button Turns white when powered on.
Specifications
Data Transfer Speed 10 Gbps
Supported Systems Windows 10/11, macOS 10.14 and above, Chrome OS
Wireless Charging Pad
The Maximum Output Power 10W
Radiated H-Field -14.93dBuv/A@10M
02 EN
Description
• Connect to your laptop using the included
cable.
• Provide charging for your laptop at up to
100W.
Plug one end of the included power adapter into
the DC-IN port and the other into a power outlet.
• 10 Gbps data transfer and 4.5W charging.
• Connect to USB devices, including USB
keyboards, mice, or printers.
Connect to a router or modem at 1 Gbps.
Supports up to 4K@60Hz output to a single
display.
• Qi-Certified
• Provides 10W charging for Samsung Galaxy,
7.5W for iPhone, and 5W for other phones or
wireless earbuds (including AirPods).
• Solid blue: Charging a phone wirelessly.
• Flashing blue: Mental or abnormal objects
detected.
• 10 Gbps data transfer.
• Support a total of 45W with Power Delivery 3.0
to charge your phone or tablet.
• 10 Gbps data transfer.
• Supports 7.5W with BC 1.2 to charge smaller
devices like smartwatches and headphones.
• UHS-I, 104 MB/s
• The SD 3.0 card slot lets you insert an SD 3.0
card to copy files to and from your device.
Connect to earphones or other devices with a
3.5 mm AUX connector.
Frequency Range 111-205kHz
Data Communication 137.9kHZ
Important Safety Instructions
1) Avoid dropping.
2) Do not disassemble.
3) Do not expose to liquids.
4) For the safest and fastest charge, use original or certified cables.
5) This product is suitable for temperate climates only.
6) The maximum ambient temperature when using this product must not exceed
95°F / 35°C.
7) Open flame sources, such as candles, must not be placed near this product.
8) Only use a dry cloth or brush to clean this product.
• You cannot charge your device wirelessly in these scenarios:
• using a case with a magnetic/iron plate;
• using a case with a grip or stand;
• using an ultra-thick (> 5 mm) protective phone case.
• Do not place any foreign objects between your device and the wireless
charger's surface, including metal pads, magnetic cards, door keys, coins,
NFC cards, or other metal objects, as they could potentially demagnetize
the wireless charger, affect the charging speed, or cause overheating.
• Wireless charging products make charging more convenient than wired
chargers, but confined by current wireless technology, their charging
speed is slower than that of wired chargers.
• High temperatures will reduce charging speed and restrict power.
It is recommended that you charge your device in environments with
temperatures below 35°C/ 95°F .
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful
interference, and (2) This device must accept any interference received,
including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
EN 03