Publicidad
Idiomas disponibles
Idiomas disponibles
button. During continuous measurement, the real time measurement value is shown in the main
display area. And the maximum value (MAX) and the minimum value (MIN) are displayed in the
secondary display area.
When continuous measurement in general measuring pattern, the secondary display area shows the
minimum value; when continuous measurement in functional measuring pattern, the secondary
display areas displays the maximum default of the hypotenuse measurement, and displays the
minimum default of horizontal measurement.
Press
button in 3 second, You will found the memory of maximum value and the minimum value.
6. FUNCTION
Addition/Subtraction
The measurement of the single distance, area and the volume can be measured through cumulative,
regressive by the addition/subtraction. Press
Operational symbol will be displayed in the main display area.
When the operation method is chosen, the measuring result will be operated automatically
In distance measuring pattern. The result will be shown in the main display area, and the latest
measuring result will be shown in the secondary display area; in area and volume measuring
pattern, press
button to got the measurement. The result will be shown in the main display
area and the latest measuring result will be shown in the secondary display area.
Area measurement
Shortly press
button until
and then press
to got the second measurement. Then the device will be calculated the area
automatically and the result will be display in the main display area.
Volume measurement
Shortly press
button until
and then press
to got the second measurement. Press
device will be calculated the cube automatically and the result will be display in the main display
area.
Pythagorean measurement
Pythagorean measurement is used to measure the target distance that cannot be targeted directly
by using the Pythagorean theorem.
1. Press
until
bevel edge, And press
rement will be done automatically and the result will be display in the main display area.
2. Press
until
edge, and press
again to got the second measurement of edge, And press
measurement of edge, The Pythagorean measurement will be done automatically and the result will
be display in the main display area.
3. Press
until
is show in the display. Shortly press
bevel edge, and press
third measurement of edge, The Pythagorean measurement will be done automatically and the
is show in the display. Press
is show in the display. Press
is show in the display. Shortly press
again to got the second measurement of edge. The Pythagorean measu-
is show in the display. Shortly press
again to got the second measurement of edge, and press
button you can choice addition and subtraction.
to got the first measurement,
to got the first measurement,
got the third measurement. Then the
to got the first measurement of
got the first measurement of bevel
to got the first measurement of
5
to got the third
to got the
Publicidad
