FuelTech SEADOO ROTAX 300 Manual De Usuario página 10

Seadoo Rotax 300 2010-2023 Adapter Harness
e.
f.
EN
g.
h.
10
After changes in the map it is necessary to save them. Write the map in
the ECU.
Calibrate the TPS. Click on the "Home" tab (6) and then click on the
"TPS/Pedal Calibration" button (7)
6
The idle throttle position sensor is something you will likely have to set
fi rst time you run the engine. Leave the lever in the idle position and click
on calibrate 0%, then press the lever all the way to the end and click on
calibrate 100%
Last step click on "Read ECU" button.
7
7