Kränzle K 1152 TS T Instrucciones De Servicio página 44

Putting into operation
44
Ersatzteile auf www.gluesing.net
5.
Screw together lance and trigger gun
pressure-tightly.
6.
Unwind high-pressure hose straight and
without nooses. (When using hose extensions
take care that the max. length of 20 m is not
exceeded!)
7.
Push on high-pressure hose to trigger gun
with safety catch.
8.
Tightly screw together high-pressure hose
and trigger gun with safety catch.
9.
Connect water hose to water inlet.
The cleaner may be connected to a water
mains (1-10 bar pre-pressure) with either cold
or hot water (up to 60°C).