Schwaiger LED 300 Manual De Instrucciones página 19

4.3. Mounting the camera
DANGER!
This product must be connected to the 230V mains supply and installed only by a qualified elec-
trician! This product belongs to protection class I, i.e. the protective earth conductor must be
connected to the camera.
Step 1
Deactivate the corresponding electric circuit. To do this, switch the corresponding circuit breaker off in the fuse
box. (OFF position)
DANGER!
The electric circuit must be disconnected during instal-
lation!
Step 2
Remove the rear mounting plate of the camera.
1. To do this, unscrew the screws (1) with a
screwdriver.
2. Remove the cover plate (2) on the back.
Step 3
Fix the waterproof
of the product
corresponding lugs into the respective fixing holes
(6 pieces).
19
USER GUIDE
rubber seal on
by carefully pressing
the back
the