Publicidad
Idiomas disponibles
Idiomas disponibles
Question/Problem - Cause
Cause
The power tool does not switch on:
• The power cord is unplugged or there is an electrical
breakdown;
• The extension cord is too long or the cross-section of
the wire is too thin;
• The supply voltage is too low;
The warranty for this product is in accordance with the law
in force from the date of purchase. You should, therefore,
keep your proof of purchase during this period. The
warranty covers any manufacturing defect in material or
operation, as well as parts and work needed for their
repairing.
Excluded from the warranty are the misuse of the product,
any repairs carried out by unauthorized individuals (outside
the service center of the brand VITO ) as well as any damage
caused by the use of it.
.
Solution
• Check the plug, socket and circuit breaker of the power
supply circuit;
• Remove or replace the extension cord;
• Check that the supply voltage is appropriate;
We declare, under our sole responsibility, that the product
labelled LAWNMOWER 1400W with code VIMR1400
complies with the following standards or normative
documents: EN 60335-1:2012/A2:2019, EN 60335-2-
77:2010, EN 62233:2008, AfPS GS 2019:01 PAK, EK9-BE-52
(v4):2020, EK9-BE-98:2020, EN 55014-1:2017, EN 55014-
2:2015,
EN
IEC
61000-3-2:2019,
3:2013/A1:2019, as defined by:
2006/42/EC - The Machinery Directive
–
2014/35/EU
Low Voltage Directive
-
2014/30/EU
The Electromagnetic Compatibility Directive
S. João de Ver,
17th march 2022
Central Lobão S. A.
Technical supervisor
Hugo Santos
EN
61000-3-
Publicidad
