Airzone Aidoo Pro AZAI6WSP Serie Guia De Inicio Rapido página 5

RS-485 port
Modbus / BACnet
RS485 port for establishing Modbus/BACnet MS-TP
communication with the device.
The device can work as a Modbus slave or as a
BACnet MS-TP slave/master.
AZX6AIQBOXM - AIRQ box in-duct IAQ monitoring and controlling device
AZX6AIQBOXM
Connection to the indoor unit
This terminal allows the device to communicate with the indoor AC unit or the thermostat via
the connection cable, allowing management of the following parameters:
•
On/Off
•
Operation mode
•
Fan speed
•
Set-point temperature
•
Adjustment of slats (not available on all models).
As well as reading of room temperature reading and errors in the unit.
Both the shape of the terminal on the Aidoo Pro device and the shape of the cable may vary
depending on the compatible manufacturer.
Factory reset
This button allows you to restore the device to factory settings by pressing it continuously for
more than 10 seconds.
Digital input
Voltage free input. It can be used as a window contact, occupancy or similar to turn the AC unit
on/off if the input changes value.
By default it will be disabled and configured as "normally open."
Relay output (12 V) - Auxiliary heat
This output provides 12 Vdc through a relay. It offers control over a heat supply stage in
situations when the unit is unable to reach the setpoint temperature desired by the user.
By default it is disabled.
Device for air purification by ionization.
AZAI6WSPxxx
EN
5