Publicidad
Idiomas disponibles
Idiomas disponibles
Hold the detector with one hand, use your thumb of the other hand to press down on the
battery compartment latch, and pull the end of the detector.
Pull out the end of the detector along the direction shown at right pictures and replace the
batteries.
WARNING:
Do not mix old and new batteries. Do not mix alkaline, standard (carbon-zinc), or
rechargeable (ni-cad, ni-mh, etc) batteries.
AC voltage range
Frequency range
Alarm mode
Flashlight
Auto power off
Low battery indication
Vibration function
Magnetic field detection mode
IP rating
Safety class
Operating temperature
Storage temperature
Humidity
Altitude
Battery
Product size
Weight
Drop test
Standards: IEC/EN61010-1, IEC/EN 61010-2-030, IEC/EN 61326-1, IEC/EN 61326-2-2.
BATTERY REPLACEMENT
TECHNICAL SPECIFICATIONS
90 ~1000VAC
(red indicator)
(green indicator)
50Hz/60Hz
Audio/visual
White spotlight
About 5 minutes
√
N/A
N/A
N/A
CAT IV 1000V
32ºF - 104ºF (O - 40ºC)
-4ºF- 122ºF(-20-50ºC)
s 80% (non-condensing)
< 2000m
2x1.5V AAA
150x18x23 (mm)
About 50g
N/A
24 ~1000VAC
9
Publicidad
