Publicidad
Idiomas disponibles
Idiomas disponibles
3
4
5
6
7
8
9
0
3.3.1. Starting
When the unit is connected to the power supply, the display will show "_ _ _ _". If
the "Stop/reset" button is pressed, the unit will go into idle mode.
Note: No button can be pressed in idle mode.
3.3.2. Idle mode
The unit enters idle mode after a specified period of time in standby mode, so time
when no keys were pressed and the door was not opened or closed. The number of
seconds before the idle mode launches is determined by the "wait time" function
set by user option # 4.
During idle mode, the LED does not light. The device must not be active.
Opening and then closing the appliance door will exit idle mode and enter standby
mode.
3.3.3. Standby mode
In standby mode, the display shows "0:00". From standby mode, the device can
switch to almost any operating mode.
3.3.4. Door opening mode
During this mode, the LED does not light up. The fan and the lamp, on the other
hand, work.
When the door is closed, if the user option OP: 60 is selected and the appliance has
been running in a manual or programmed cooking cycle, the appliance will go into
pause mode when the door is opened.
In all other cases, the unit will return to standby mode with the user option OP: 61.
Opening and closing the door will erase all information about the running, manual
or programmed program.
3.3.5. Pause mode
During manual cooking or when the appliance is
door is open or closed, the appliance will go into pause mode when you press the
"stop/reset" button.
0:30
0:45
1:00
1:30
2:00
3:00
4:00
5:00
100%
100%
100%
100%
100%
100%
100%
100%
in
programmed operation, if the
80%
80%
80%
80%
80%
80%
80%
80%
Publicidad
