Royal Catering RC-MV-05 Manual De Instrucciones página 28

3.3.10. Programming mode
This mode allows the user to assign cooking times and power levels to individual
number buttons.
a) Open the door and press "1" for 5 seconds. The buzzer will sound once and the
unit will go into programming mode.
b) The display will show "ProG".
c) Press any number from 0 to 9 and the LED will display the saved time. Then you
can enter the time.
d) Press "Hold 0%", "Defrost 20%", "Medium 50%" or "Med.-Hi 70%" to enter the
power level. The LED will display the appropriate power. If the same button is
pressed twice, the power will change to PL10. If no power is selected, PL10 is
the default value.
e) To change the cooking mode: if you press "X2", the LED will display "CF: XX".
The default ratio is 80%. "CF: 80" is displayed. If you need to change the cooking
power, just press one of the number buttons.
f) After setting the time and power, press "Start" within 30 seconds and the
cooking program will be saved. After the program is saved, the display will show
"ProG".
g) If the entire cooking time exceeds the maximum time set in User Option 7,
pressing the "Start" button to save the program will trigger the buzzer to emit
3 short beeps, which means that this time cannot be set. Then the LED will
revert to displaying "ProG". The time set before programming will remain the
same.
h) Close the door, the unit will return to standby mode. If the "stop/reset" button
is pressed during the setting process, the unit will go into the door open mode.
A program that has not been saved will be lost. If there is a program stored in
the memory, press the corresponding numeric button and the stored program
will start. If no program is saved, the buzzer will sound when a numeric button
is pressed and it will not work.
For example: set the program as memory cooking. The power level is PL7, the
cooking time is 1 minute and 25 seconds.
Step 1: In idle mode, press the number button "1" for 5 seconds; the
•
display will show "ProG".
Step 2: Press the number button "3", the program will be saved as
•
number "3".
Step 3: Press the number buttons "1", "2" and "5" to enter the cooking
•
time.
Step 4: Press the "Med.-Hi 70%" button and the display will show
•
"PL7". The setting is complete.
Step 5: Press "Start" to save the settings. The next time you use the
•
program, just press the "3" button and the program will start.
Caution:
1. If the current is cut off, the saved program will not be lost.