Product Overview - Astera PowerStation FP5-PS Manual De Instrucciones

CONTENTS
#1 PowerStation

PRODUCT OVERVIEW

Airline track
Backside magnets
USING THE POWERSTATION
1. Connectivity
Connect the PowerStation to the lamp through the hard wired DC output cable to provide
battery power and data transmission/
The DC input socket is used for charging the battery of the PowerStation with the PSU.
Both connections can be used simultaneously also while the lamp is paired to the
AsteraApp or to any CRMX transmitter./
2. Switching ON or OFF
Press the power button of the connected light for one second to switch the PowerSta-
tion ON. Press shortly to power OFF.
#2 Lamp socket
(not included in
NYX Bulb Set)
Display and Control Panel
DC Input socket
1s
ON
#3 Manual
DC Output Cable
3s 5s
1x
OFF
4
Power ON
via connected lamp
3x 5x