Parweld XR940A Instrucciones De Uso página 6

List of Warnings within these User Instructions
!
WARNING
1. This product is part of a system that helps protect against certain airborne contaminants.
Misuse may result in sickness or death. For proper use see User Instructions.
2. The Parweld Powered Air Purifying Respirator Assembly is not intrinsically safe. Do not use in
fl ammable or explosive atmospheres. Doing so may result in serious injury or death.
3. Always correctly use and maintain the fi lter assembly. Failure to do so may reduce respirator
performance, overexpose you to contaminants, and may result in sickness or death.
a. Inspect fi lter and gasket(s) before fi rst installation or reinstallation of a fi lter, replace if
damaged.
b. Always properly install the fi lter into the blower unit.
c. Keep sealing gasket(s) clean.
d. Never attempt to clean fi lter by knocking or blowing out accumulated material. Doing so will
damage the fi lter media.
e. Store the fi lter as described in these User Instructions within the recommended storage
temperature conditions and observe fi lter expiration dates.
4. Failure to follow these User Instructions may reduce respirator performance,
overexpose you to contaminants, and may result in injury, sickness, or death.
a. Do not use with parts or accessories other than those manufactured by Parweld as described
in these User Instructions or on the CE approval label for this respirator.
b. The Parweld Powered Air Purifying Respirator XR940A/XR950A Assembly is one component
of an approved respiratory protection system. Always read and follow all User Instructions
supplied with your Parweld headgear and other system components in order to ensure
correct system operation.
5. Always correctly use and maintain the lithium ion battery packs. Failure to do so may cause
fi re or explosion or could adversely affect respirator performance and result in injury,
sickness, or death.
a. Do not charge batteries with unapproved chargers, in enclosed cabinets without ventilation,
in hazardous locations, or near sources of high heat.
b. Charge in an area free of combustible material and readily monitored.
c. Do not immerse.
d. Do not use, charge, or store batteries outside the recommended temperature limits.
6. Dispose of lithium ion battery packs according to local environmental regulations. Do not crush,
disassemble, dispose of in standard waste bins, in a fi re or send for incineration. Failure to
properly dispose of battery packs may lead to environmental contamination, fi re or
explosion.
7. To reduce exposure to hazardous voltage:
a. Do not attempt to service the chargers. There are no user-serviceable parts inside.
b. Do not substitute, modify or add parts to the chargers.
c. Inspect the chargers and power cords before use. Replace if any parts are damaged.
d. Do not use the chargers outdoors or in wet environments areas.
6 | English
XR940A / XR950A PAPR